Input voltage: 9-16V

Input current: 2.0A(MAX)

Input 　　 output: 5V 2.4A

Support BC1.2 charging protocol, with Android series and IOS Apple series charging recognition, driving recorder power supply, iPad charging, tablet charging, power bank charging, etc.

At rated input voltage and rated output current, the average charging efficiency is over 87%.

With over-current protection, short-circuit protection, over-temperature protection, over-voltage protection, reverse connection protection.

Environmental requirements: working temperature -40℃～+85℃;

Storage temperature is -40℃～+90℃.

Single USB output

Input: 5V 1.5A (navigation output)

Output: 5V 1.5A

Support USB2.0 and BC1.2 charging protocols, with Android and IOS charging recognition, driving recorder power supply, iPad charging, tablet charging, power bank charging, etc.

Support carplay, the interconnection function of Apple mobile phones, carlife, the interconnection function of Android phones, and the function of reading data from U disk.

Car call system ICC host:

Working voltage: 9V~16V

Working current: 1100±300mA

Distortion: ≤1%

Maximum power: ≥4W distortion <10%

Signal to noise ratio: ≥60dB(A)

Channel separation: ≥55dB

Car call system ICC microphone:​

Directivity: Omni-directional MEMS

Sensitivity: -16±3dB

Distortion: <1%

Signal to noise ratio: ≥60dB(A)

Working voltage: 8V±10%

Working current: <10mA

ICC speaker of car call system:

​​Rated power: 4W±10%​

Rated impedance: ​DCR=3.5OHM±7%​

Car call system ICC switch:​

Working voltage: 8V±10%

Working current: 0.5mA~40mA​

Number of presses: 150,000 times

Single-point microphone

Sensitivity: -10±1dB

Frequency 　　 width: 200Hz~7,000Hz (@200Hz -20.5±2dB; @4KHz -11±2dB)

Distortion THD: <1% (f=1kHz, 94dBpsl)

S/N: Min 60dB(A) (f= 1kHz, 94dBspl)

Working voltage: 8V±10%

Working current: Max:10mA

Single-point microphone

Sensitivity: -10±1dB

Frequency 　　 width: 200Hz~7,000Hz (@200Hz -20.5±2dB; @4KHz -11±2dB)

Distortion THD: <1% (f=1kHz, 94dBpsl)

S/N: Min 60dB(A) (f= 1kHz, 94dBspl)

Working voltage: 8V±10%

Working current: Max:10mA

Single-point microphone

Sensitivity: -10±1dB

Frequency 　　 width: 200Hz~7,000Hz (@200Hz -20.5±2dB; @4KHz -11±2dB)

Distortion THD: <1% (f=1kHz, 94dBpsl)

S/N: Min 60dB(A) (f= 1kHz, 94dBspl)

Working voltage: 8V±10%

Working current: Max:10mA

omnidirectional microphone

Sensitivity: -10±3dB

Frequency 　　 width: 100Hz~10kHz

Distortion THD: <1% (f=1kHz, 94dBpsl)

S/N: Min 60dB(A) (f= 1kHz, 94dBspl)

Working voltage: 5±5%

Working current: 3.0±2mA

omnidirectional microphone

Sensitivity: -14.5±3dB

Frequency 　　 width: 100Hz~10kHz

Distortion THD: <1% (f=1kHz, 94dBpsl)

S/N: Min 60dB(A) (f= 1kHz, 94dBspl)

Working voltage: 8±10%

Working current: 6±3mA